Fast, Reliable Gate Repair Across Franklin Square
Gate repair in Franklin Square typically costs $180-$650 depending on the problem, and most jobs are completed in a single visit with upfront pricing settled before we start. If your gate is sagging, sticking, or won’t latch, a trained technician can usually diagnose and fix it same-day. Call (877) 326-7055 - a live person answers 24 hours a day, 7 days a week.
We’ve been driving to Franklin Square since 1984, and we know the hamlet’s streets well. From the Cape Cods clustered near Rath Park to the ranches along Hempstead Turnpike and the post-war homes off Lincoln Avenue, we’ve re-hung, welded, and realigned gates on 40×100 ft lots where the original hardware is now older than most of the homeowners. Franklin Square’s inland position doesn’t protect it from Nassau County’s coastal humidity. Salt-laden air from the South Shore bays and Long Island Sound accelerates rust on hinges, latches, and gate motors year-round. Winter freeze-thaw cycles heave the shallow concrete footings common to 1950s installations, throwing posts out of plumb by March. Our Gate Repair team carries stainless hardware, welding equipment, and post-leveling tools on every truck, so we don’t leave until the gate closes like it should.
Why Ironworks Gate Co. of New York City Is Franklin Square’s Preferred Gate Repair Company
Franklin Square homeowners don’t call us for flashy trucks or low-ball bids. They call because their neighbor’s gate still works ten years after we fixed it, or because their contractor from 2019 never showed up for the callback. Over 42 years, we’ve built a reputation in Nassau County by doing what we say we’ll do and standing behind it in writing.
Our response time to Franklin Square is typically same-day or next-morning. We’re familiar with the local permit landscape, which matters more here than most homeowners realize. Nassau County requires building permits for gate and fence replacement, but not for repair. That distinction shapes nearly every job we do in 11010. We regularly advise customers that re-hinging a sagging gate, welding a cracked frame, or replacing a rotted post with proper anchoring qualifies as repair. Full panel replacement does not. This local knowledge saves Franklin Square homeowners both paperwork and money.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands. They work by our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th gate in Franklin Square gets the same care as the first.
Our Gate Repair Services in Franklin Square
Hinge Repair
Original hinges on Franklin Square’s 50-75 year old chain-link and wrought iron gates are our most common repair. Decades of salt-air corrosion seize pins, elongate holes, and shear mounting plates. A typical hinge repair in Franklin Square runs $180-$320. We remove the corroded hardware, clean the mounting surface, and install stainless steel or galvanized replacements rated for coastal exposure. On a recent call near Rath Park, we replaced three seized hinges on a 1962 ranch’s side-yard gate - the original steel had rusted to half its thickness. The gate swung freely afterward. No permit required.
Post Repair
Shallow concrete footings from Franklin Square’s post-WWII building boom don’t survive Nassau County’s freeze-thaw cycles. Water seeps into cracks, expands when it freezes, and heaves posts two inches out of plumb by spring. A typical post repair or re-footing in Franklin Square runs $280-$480. We excavate to below the frost line, pour new concrete with proper drainage, and realign the post before re-hanging the gate. This preserves the existing gate structure and avoids the permit trigger that full post replacement would require.
Weld Repair
Metal fatigue on original wrought iron frames shows up as cracks at stress points, separated pickets, or broken scrollwork. A typical weld repair in Franklin Square runs $200-$450 depending on access and material thickness. We grind to clean metal, weld with matching rod, and finish with rust-inhibiting primer. For gates with significant corrosion, we’ll also discuss whether the frame’s remaining wall thickness justifies repair or if we’re patching something that will fail again in two seasons. We’ll tell you straight.
Gate Realignment
A gate that drags, binds, or won’t latch is usually a geometry problem. Posts settle, hinges wear unevenly, and frames twist. A typical realignment in Franklin Square runs $180-$340. We plumb the posts, shim or replace hinges, and adjust the latch strike until the gate closes with two fingers of pressure. We recently re-hung a sagging wrought iron side-yard gate on Lincoln Avenue, where the original hinges had corroded from decades of salt air and the concrete footing had heaved from freeze-thaw, throwing the post 2 inches out of plumb. We replaced the hinges with stainless steel, welded a patch on the frame, and realigned the gate - all without triggering a replacement permit for our customer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin Square
We carry parts and diagnostic tools for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Franklin Square customers with automated driveway gates, this means we don’t order parts and come back next week. We stock common failure items - Viking control boards, Ghost Controls actuator arms, DoorKing loop detectors, Elite safety sensors - and can usually complete motor repairs or operator replacements in one visit. If your gate opener is beeping, reversing, or dead, we’ll identify the brand, diagnose the fault, and fix it with the right component. Not a universal kit. Not a workaround. The right part.
Common Gate Repair Problems We See in Franklin Square Homes
- Salt-air corrosion on hinges and latches. Franklin Square’s position between the South Shore bays and Long Island Sound means persistent coastal humidity. Original steel hinges rust from the inside out, pins seize, and latches fail to engage. We see this most on side-yard gates facing prevailing winds.
- Freeze-thaw heave on shallow footings. The 1950s standard was a 24-inch concrete pour. Modern frost depth in Nassau County is 36 inches. Every winter, that gap costs Franklin Square homeowners a plumb post and a binding gate.
- Metal fatigue in 50-75 year old wrought iron frames. Original gates on Franklin Square’s Cape Cods and ranches have cycled through tens of thousands of openings. Stress cracks propagate at weld points and scroll attachments. We’ve repaired gates hung in 1952 and gates hung in 1968. The metal tells us what it needs.
- Misalignment from cumulative settling. Small lots, tight clearances, and decades of soil movement mean a gate that worked in 1995 binds in 2025. Realignment restores function without replacing what still has life in it.
Pricing for Gate Repair in Franklin Square, NY
| Service | Typical Range in Franklin Square |
|---|---|
| Hinge repair / replacement | $180 - $320 |
| Post repair / re-footing | $280 - $480 |
| Weld repair (frame / pickets) | $200 - $450 |
| Gate realignment | $180 - $340 |
| Lock / latch repair | $150 - $280 |
| Rust treatment + coating | $220 - $380 |
| Automation diagnostic / repair | $200 - $550 |
What moves the number: material type (wrought iron vs. chain-link), access difficulty, whether the post needs re-footing, and if automation components are involved. We settle the full price before turning a bolt. No surprises on the bill. Every repair over $250 qualifies for our $50 discount. Seniors and veterans receive 5% off, always. Call (877) 326-7055 for a free estimate - we’ll come to your Franklin Square home, assess the gate, and give you a written number you can count on.
We Also Serve Cities Near Franklin Square
Our trucks cover all of central Nassau County. We regularly repair gates in Franklin Square and the surrounding communities: Lakeview, West Hempstead, Elmont, and Malverne. Same-day service, same upfront pricing, same 90-Day Done Right Promise.
Serving Franklin Square, NY - Our Local Coverage Area
We’re based in the Franklin Square area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Franklin Square
No - Nassau County does not require a building permit for gate repair, including hinge replacement, welding, post re-footing, or realignment. You only need a permit for full gate or fence replacement. This distinction drives most of our Franklin Square work toward repair rather than swap-out. Call (877) 326-7055 and we’ll advise whether your specific job stays in the repair category.
Salt-laden coastal humidity accelerates rust on chain-link frames, gate hinges, and bottom tension wires by several years compared to inland locations. The galvanized coating on original 1960s chain-link has often worn through by now, exposing bare steel. We treat active rust with conversion coating, weld-patch weak points, and replace hardware with stainless or hot-dip galvanized components rated for marine exposure. Call (877) 326-7055 for a corrosion inspection.
Freeze-thaw cycles heave the shallow concrete footings common to 1950s installations, tilting posts and throwing gate geometry off. The ground freezes, expands, lifts the footing, and thaws unevenly in spring. By March, your gate is dragging or binding. We excavate to proper frost depth, re-pour with drainage, and realign. Most post repairs in Franklin Square are scheduled between March and May for exactly this reason. Call (877) 326-7055 for an assessment.
Most 50-75 year old wrought iron gates in Franklin Square are repairable if the frame wall thickness hasn’t rusted below 1/8 inch and the posts are structurally sound. We weld cracks, replace failed scrollwork, install new hinges, and realign. Full replacement is only necessary when corrosion has compromised the frame’s structural integrity or when the homeowner wants a different style. We inspect and tell you straight which category you’re in. Call (877) 326-7055 for a free second opinion on any replacement quote.
We repair the full range of gates found on Franklin Square’s post-war lots: single-car chain-link driveway swing gates, wrought iron side-yard pedestrian gates, estate-style automated driveway gates, and aluminum or steel sliding gates. Our technicians are certified on nine automation brands including Viking, Ghost Controls, DoorKing, and Elite. Whatever is on your driveway, we’ve likely repaired its twin on a neighboring block. Call (877) 326-7055 to describe your gate and schedule service.
Ready to get your gate working right? Call Ironworks Gate Co. at (877) 326-7055. A live person will answer, 24 hours a day, 7 days a week. We’ll schedule your free estimate, give you an upfront price, and back every repair with our written 90-Day Done Right Promise. Done right - and backed in writing.
Written by Frank Delmonico, Owner at Ironworks Gate Co., serving Franklin Square since 1984.