Fast, Reliable Gate Parts & Welding Across Uniondale
Gate parts and welding repair in Uniondale typically runs $180-$650 depending on whether you need hinge replacement, post resetting, or full custom weldments on a corroded iron frame. Most calls from the 11553 area reach us within 45 minutes, and we carry the common hinge sizes, roller assemblies, and welding equipment to finish the job in one visit. Call (877) 326-7055 - a live person answers, day or night.
We’ve been working on Uniondale gates since 1984. We know the Cape Cods off Jerusalem Avenue, the ranches along Front Street, and the split-levels near Hofstra’s edge. These homes weren’t built with gates in mind. Most driveway gates here were added decades after construction, often by homeowners who poured shallow footings and skipped permits. That history lives in the metal. We untangle it.
Why Ironworks Gate Co. of New York City Is Uniondale’s Preferred Gate Parts & Welding Company
Uniondale homeowners call us back. Not because we’re the cheapest, but because we fix what others patch. Our Gate Parts & Welding team has rebuilt gates on School Street, replaced salt-rotted hinges on Argyle Avenue, and straightened frames on Charles Lindbergh Boulevard where the freeze-thaw had shifted posts three inches out of plumb.
We answer the phone live, 24 hours a day, 7 days a week. No voicemail, no callback queue. When your gate won’t close at 9 PM and you’re leaving for JFK at 5 AM, that matters.
Our technicians are background-checked, uniformed, and work by the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th Uniondale job gets the same care as the first. And every repair is backed by our 90-Day Done Right Promise - written, no paperwork, no arguing. If it’s not right, we come back and make it right.
Frank Delmonico has led this company since its founding. He still reviews the tricky jobs personally.
Our Gate Parts & Welding Services in Uniondale
Hinge Replacement
Uniondale’s salt air off Jones Beach destroys hinge pins. We’ve pulled hinges from gates near Front Street where the pin had fused to the barrel, splitting the gate frame when the homeowner forced it. Replacement hinges for iron and steel gates in Uniondale run $180-$320 installed, including alignment. We use sealed, greaseable hinges on coastal-exposed properties, not the hardware-store grade that fails again in two seasons.
Post Replacement & Resetting
This is the big one in Uniondale. Those 1945-1965 Cape Cods and ranches often have gate posts set in footings too shallow for Nassau County’s freeze-thaw. We’ve reset posts on School Street where the concrete had heaved four inches, throwing a swing gate so far out of plumb it scraped the driveway apron. Post replacement with proper 36-inch footing and rebar runs $450-$650 in Uniondale. Resetting an existing post with new concrete and adjustment is $280-$420. We check for underground utilities and match the Town of Hempstead setback rules.
Rail Repair & Custom Welding
Multi-generational patch welds are everywhere in Uniondale. Last month on Argyle Avenue near the 11553 border, we replaced seized hinges and a worn FAAC operator on a 1959 ranch where the previous homeowner had welded mismatched posts without permits. The salt air had crystallized latch hardware, and we had to re-plumb the gate with custom weldments before installing a new LiftMaster swing opener. Custom welding and rail repair in Uniondale runs $220-$480 depending on metal type and access. We weld in place when possible, or fabricate in our shop for complex jobs.
Gate Rollers & Track
Slide gates on Uniondale’s retrofitted posts suffer. When the post shifts, the track goes out of level, and rollers either bind or jump. We’ve replaced roller assemblies on Hempstead Turnpike-area properties where the original steel rollers had worn flat spots from running canted. Nylon or sealed steel roller replacement runs $160-$290. Track realignment with post adjustment is $200-$350.
Latch & Lock Hardware
Salt crystallization seizes latches. We’ve drilled out frozen magnetic locks near Uniondale’s northern edge where the Gulf Stream moisture had penetrated the housing. Latch and lock replacement runs $140-$260, with weather-sealed upgrades available for exposed locations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Uniondale
We stock parts and carry factory training for nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Uniondale’s older retrofitted gates, this matters. A 1980s FAAC slide operator on a hand-welded iron frame needs different parts than a modern Ghost Controls residential kit. We don’t guess. We diagnose, stock the correct components, and fix it on the first visit. Most Gate Parts & Welding in Uniondale calls finish same-day because our trucks carry the inventory that generalist contractors don’t.
Common Gate Parts & Welding Problems We See in Uniondale Homes
- Original hinge pins seize from salt corrosion, splitting gate frames when forced open. The South Shore salt air penetrates ungreased hinge barrels, and Uniondale’s older iron gates often lack the sealed hinges that would survive within ten miles of the Atlantic. We replace with marine-grade hardware and set an annual maintenance schedule.
- Retrofitted posts with shallow footings heave in freeze cycles, misaligning slide rails and rollers. Nassau County’s freeze-thaw runs deeper than the 18-inch footings we commonly find on School Street and Argyle Avenue properties. The post tilts, the track tilts with it, and the gate either jams or tears itself apart trying to move.
- Town of Hempstead permits skipped for electric operators. Because Uniondale is unincorporated, any automatic gate installation triggers Town of Hempstead building permit requirements. We’ve been called to homes where unpermitted wiring and concrete work failed inspection during sale, delaying closings and requiring expensive rework.
- Multi-generational patch welds from successive homeowners create structural weak points. Each owner added their own bracket, their own hinge, their own latch plate. The gate becomes a museum of mismatched metals with incompatible galvanic properties, accelerating corrosion at every joint.
Pricing for Gate Parts & Welding in Uniondale, NY
| Service | Typical Range in Uniondale |
|---|---|
| Hinge replacement (pair, installed) | $180 - $320 |
| Post resetting with concrete | $280 - $420 |
| Post replacement with new footing | $450 - $650 |
| Custom welding / rail repair | $220 - $480 |
| Gate roller / track adjustment | $160 - $350 |
| Latch & lock replacement | $140 - $260 |
| Seasonal tune-up (lubrication, adjustment, inspection) | $89 |
What moves the needle: metal type (iron vs. aluminum vs. steel), access for welding equipment, whether the post footing has failed completely, and whether Town of Hempstead permit remediation is needed. We give you the full price before turning a bolt. No surprises on the bill. And remember: $50 off any repair over $250, free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (877) 326-7055 for your exact quote - estimates are free.
We Also Serve Cities Near Uniondale
Our shop dispatches daily to East Garden City, Hempstead, East Meadow, and Garden City. Same trucks, same stocked parts, same 90-Day Done Right Promise. If you’re on the border of 11553 and 11530, we’ll sort out the ZIP code confusion and get there.
Serving Uniondale, NY - Our Local Coverage Area
We’re based in the Uniondale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Uniondale
Usually both, in that order. The shallow footings common to Uniondale’s postwar construction let the post tilt through freeze-thaw cycles, which then puts eccentric load on the hinge and accelerates corrosion. We check plumb first, then hinge condition. If the post has shifted more than two inches, resetting or replacement is the only lasting fix. Call (877) 326-7055 and we’ll diagnose it on site - estimates are free.
Yes. Uniondale is unincorporated within the Town of Hempstead, so any electric gate operator installation requires a Town building permit. Many homeowners and even some contractors skip this, creating liability exposure that surfaces during home inspections or resale. We handle permit submission as part of our installation process. For existing unpermitted operators, we can assess what’s needed to bring them into compliance. Call (877) 326-7055 to discuss your specific situation.
Very likely. We’ve seen this pattern across Uniondale’s ranch neighborhoods: a hard freeze heaves the post, the slide track goes out of level, and the opener strains against the mechanical bind until it faults out. The opener itself may be fine. We check track level and post plumb before condemning the motor. If the post needs resetting, doing that first often saves the cost of an unnecessary operator replacement. Call (877) 326-7055 - we’ll sort out root cause before quoting.
Yes. We maintain parts relationships for FAAC, including legacy components that are no longer in factory production. For a 1980s unit, we evaluate whether repair is cost-effective versus replacement with a modern operator. Parts repair typically runs $240-$380; full operator replacement with permit-compliant installation runs $1,200-$1,800 in Uniondale. We give you both options straight. Call (877) 326-7055 to schedule an assessment.
We can, and we do this regularly in Uniondale. We cut away the incompatible patches, straighten the frame on a jig, and weld with matching rod to the original metal. Then we prime and paint to slow the salt corrosion that started the problem. Custom welding and frame straightening runs $280-$480 depending on gate size and damage extent. The result is a gate that closes like the day it was hung, not a collection of someone else’s shortcuts. Call (877) 326-7055 for an exact quote - estimates are free.
Ready to fix your gate right? Call Ironworks Gate Co. at (877) 326-7055. A live person answers, 24 hours a day, 7 days a week. We’ll give you an upfront price, show up when we say, and back the work with our written 90-Day Done Right Promise. Done right - and backed in writing.
Written by Frank Delmonico, Owner at Ironworks Gate Co., serving Uniondale since 1984.