Fast, Reliable Gate Parts & Welding Across Hicksville
Gate hinge replacement in Hicksville typically costs $180-$320 and most jobs are completed in a single visit, with our Gate Parts & Welding team carrying the specific pins, brackets, and welding equipment needed for postwar chain-link and steel gates. We’ve been serving Hicksville homeowners since 2013, and we understand the particular punishment this area’s coastal environment dishes out to metal gates. Call us at (877) 326-7055 - a live person answers, 24 hours a day, 7 days a week.
Hicksville sits roughly 8-10 miles south of Long Island Sound, close enough for salt-laden air to accelerate corrosion of steel hinges, chain-link frames, and latches beyond what purely inland suburbs like Syosset experience. The town’s dense grid of postwar Cape Cods and ranch homes, built largely between 1947 and 1965, means a high concentration of original or first-replacement galvanized chain-link and steel-post gates now 50-70 years old and actively failing. We know the ZIP codes here - 11815, 11819, 11854, 11855 - and we know the neighborhoods: the original Cape Cods near Hicksville Road, the ranch tracts off Jerusalem Avenue, the split-levels around Broadway Mall. When a gate sags, rusts through, or fails a pool inspection, Hicksville homeowners need someone who understands why it failed and how to fix it so it stays fixed.
Why Ironworks Gate Co. of New York City Is Hicksville’s Preferred Gate Parts & Welding Company
Frank Delmonico founded Ironworks Gate Co. in 1984, and we’ve built our reputation in Nassau County one repair at a time. Hicksville homeowners know us because we arrive when we say we will, we price the job before we start, and we stand behind every weld with our written 90-Day Done Right Promise - the Keystone Standard. No paperwork, no arguing: if it’s not right, we come back and make it right.
Our response time to Hicksville averages under 90 minutes during business hours, and our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. We’re not the cheapest bid you’ll find, and we don’t try to be. We’re the last call you’ll need to make.
We carry parts and welding equipment for nine gate-automation brands - including Ghost Controls, DoorKing, and Elite - so the correct fix happens on the first visit, whatever is on your driveway. Most Hicksville jobs are completed in a single visit, with upfront pricing settled before a single bolt is turned.
Our Gate Parts & Welding Services in Hicksville
Hinge Replacement
Corroded hinge pins seized from salt-laden coastal air are the most common call we get from Hicksville. Replacement with stainless pins is required every 5-7 years here versus 10 or more inland. We stock galvanized and stainless hinge sets sized for the 1-3/8″ and 1-5/8″ chain-link frames that dominate Hicksville’s postwar housing stock, and we weld new hinge brackets directly to steel posts when the original mounting surface has rotted away. A typical hinge replacement in Hicksville runs $180-$320.
Post Replacement
Hicksville’s high water table causes buried gate post concrete footings to wick moisture upward, leading to accelerated rust failure at the base of steel hinge posts - a problem worse here than in drier inland suburbs. We serviced a 1964 ranch on Coventry Avenue where the original chain-link gate’s hinge post had rusted completely through at the concrete line. We cut out the rotted section, welded in a galvanized replacement stub with a stainless steel base plate, and fitted a new LiftMaster hinge bracket. The pool inspector signed off the same afternoon. Post replacement with welding in Hicksville typically runs $340-$580 depending on concrete removal and depth.
Rail Repair
Gate frames sag due to heaved concrete posts in Nassau’s clay soil, especially after winter’s freeze-thaw cycle. Rather than replace entire frames, we re-plumb and re-weld - straightening bent top and bottom rails, adding gusset plates at stress points, and resetting the gate square in its opening. This saves Hicksville homeowners the cost of full gate replacement and preserves the original metal that has already proven it can last decades. Rail repair and frame straightening in Hicksville runs $220-$420.
Custom Welding
When a standard bracket won’t fit a 60-year-old post or a pool-enclosure gate needs a custom latch mount to satisfy Nassau County code, we fabricate on-site. Our mobile welding rigs handle steel, galvanized steel, and aluminum repairs up to 1/4″ thickness. Custom welding for gate modifications in Hicksville typically runs $150-$280 for straightforward jobs, $300-$500 for complex fabrications requiring multiple weld passes or specialty hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hicksville
We maintain local parts inventory for nine major gate-automation brands, including Mighty Mule and Elite openers commonly found on Hicksville’s swing-gate installations. This means no waiting for shipped parts when your Ghost Controls actuator fails or your DoorKing keypad needs replacement. Our technicians are trained and equipped to diagnose and repair automation integrated with welded gate hardware, so we don’t just fix the metal - we make sure the motor, the hinge, and the control system all work together. Fast turnaround matters when a failed pool-enclosure gate has a Nassau County inspection deadline attached.
Common Gate Parts & Welding Problems We See in Hicksville Homes
- Rusted-through hinge posts at the concrete line. Hicksville’s high water table wicks moisture into concrete footings, and the base of steel hinge posts corrodes from the inside out. We catch this during seasonal tune-ups - $89 - before the post shears off completely.
- Pool gate latches rusted shut or misaligned, triggering Nassau County code violations. Because so many Hicksville homes added in-ground pools in the 1970s-1990s long after original fencing was installed, the pool-enclosure gate was often an afterthought. We install FAAC hydraulic arms that resist corrosion and satisfy self-closing, self-latching requirements.
- Gate frames thrown out of plumb by heaved posts after winter. Nassau County’s freeze-thaw cycle acts on Long Island’s heavy glacial-till and clay soils, causing posts to shift and binding latches or dragging bottoms. We re-weld and re-hang rather than replace.
- Original 1960s chain-link gates with no modern hinge bracket mounting surface. Decades of deferred maintenance mean corroded hardware and sagging frames are the norm. We fabricate custom weld-on brackets that accept current LiftMaster or Elite hardware without replacing the entire post.
Pricing for Gate Parts & Welding in Hicksville, NY
| Service | Typical Range in Hicksville |
|---|---|
| Hinge replacement (single gate) | $180 - $320 |
| Post replacement with welding | $340 - $580 |
| Rail repair / frame straightening | $220 - $420 |
| Custom welding (basic) | $150 - $280 |
| Custom welding (complex fabrication) | $300 - $500 |
| Seasonal tune-up | $89 |
What moves a job toward the higher end: concrete removal and re-pour for posts, multiple hinge points on double gates, automation integration requiring electrical troubleshooting, and rush service for pending pool inspections. We settle the exact price before we start - a square deal, no surprises on the bill. Active offers: $50 off any repair over $250, free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (877) 326-7055 for your free estimate.
We Also Serve Cities Near Hicksville
Our Gate Parts & Welding in Hicksville coverage extends to Jericho, New Cassel, Westbury, and Salisbury - the same response standards, the same stocked parts, the same written guarantee. If you’re on the border of two towns, call us and we’ll confirm your service area directly.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hicksville
Salt-laden coastal air from Long Island Sound, roughly 8-10 miles north, accelerates oxidation of steel hinges and hardware beyond what purely inland suburbs experience. Hicksville’s position on Nassau County’s south shore exposure path means stainless steel pins are practically mandatory here, with replacement needed every 5-7 years versus 10-plus inland. We use galvanized brackets and stainless pins on every Hicksville hinge job. Call (877) 326-7055 for an exact quote - estimates are free.
Yes, a non-catching latch fails the self-latching requirement that Nassau County and the Town of Oyster Bay strictly enforce for pool-enclosure gates. Because many Hicksville pool gates were repurposed from original chain-link fencing, they’re common inspection failures. We realign, replace, or upgrade latches to pass inspection, and we can install corrosion-resistant FAAC hydraulic arms if the gate also lacks reliable self-closing action. Call (877) 326-7055 - we can often schedule same-day service before your re-inspection window closes.
Yes, provided the post wall thickness hasn’t rotted below 1/8″. We cut away corroded sections, weld in galvanized replacement stubs with stainless base plates, and mount modern hinge brackets sized for your gate frame. We’ve done this hundreds of times on Hicksville’s postwar housing stock. The typical repair runs $340-$580 and is completed in one visit. Call (877) 326-7055 for a free assessment.
Usually both, but the root cause is typically heaved posts from Nassau County’s freeze-thaw cycle acting on clay soils. We diagnose by checking plumb with a level: if posts are out of true, we reset or replace; if the frame has twisted, we re-weld and add gusset plates. Often it’s a combination requiring both post work and frame straightening. The full repair in Hicksville typically runs $340-$620. Call (877) 326-7055 - we’ll tell you exactly what’s needed before we start.
Yes, LiftMaster is one of nine brands we service, and we stock common LiftMaster hinge brackets, actuator arms, and control boards for Hicksville customers. We integrate automation repair with welded hardware fixes so the complete system operates together. Most LiftMaster-related gate service in Hicksville is completed same-day. Call (877) 326-7055 for scheduling - a live person answers, 24 hours a day, 7 days a week.
Ready to get your gate working right? Call Ironworks Gate Co. at (877) 326-7055 for a free estimate. We’ll be there when we say, we’ll price it upfront, and we’ll stand behind it with our written 90-Day Done Right Promise. Done right - and backed in writing.
Written by Frank Delmonico, Owner at Ironworks Gate Co., serving Hicksville since 2013.