Fast, Reliable Gate Parts & Welding Across Greenburgh
Gate parts and welding in Greenburgh typically runs $180-$650 depending on whether you need a simple hinge pin or custom fabrication for a historic estate gate. Most repairs are completed in a single visit, with same-day service available throughout the 10533 ZIP code and surrounding Greenburgh neighborhoods. Call (877) 326-7055 and a live person will pick up, 24 hours a day.
We’ve worked Greenburgh’s river-adjacent corridor for over 42 years. We know the difference between a 1970s split-level driveway in Hartsdale and a pre-WWI estate on Broadway in Irvington. That matters when the part you need hasn’t been manufactured in thirty years, or when drilling new hardware into a 130-year-old brownstone pillar would be a mistake you’d regret every time you pulled into your driveway.
Why Ironworks Gate Co. of New York City Is Greenburgh’s Preferred Gate Parts & Welding Company
Greenburgh homeowners call us back because we treat their gates like the permanent fixtures they are. Our Gate Parts & Welding in Greenburgh service draws from four decades of solving problems specific to this river valley: humidity corrosion, freeze-thaw footing shifts, and hardware that predates the internet by a century.
Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. We carry a written 90-Day Done Right Promise on every repair, known internally as the Keystone Standard. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service. When your gate won’t close at 9 PM and you’re expecting guests, that matters.
Our Gate Parts & Welding Services in Greenburgh
Hinge Replacement
Hinge replacement in Greenburgh is rarely straightforward. The river-facing estates on Broadway and Route 9 in Irvington often feature decorative wrought-iron gates set into original brownstone or bluestone pillars using lead-poured pintle sockets. Standard hinge-replacement methods destroy the pillar face. Our Gate Parts & Welding team knows how to re-pour or sleeve these sockets rather than drilling new hardware into 130-year-old stone. A typical hinge replacement on a historic Greenburgh estate runs $280-$450, including the custom fitting.
Post Replacement
Gate posts in Greenburgh take a beating from Westchester’s hard freeze-thaw cycles. The Hudson River valley’s prolonged ground fog and elevated moisture keep post footings in near-constant dampness, and every spring we see posts that have shifted enough to throw automated swing-gate alignment out of spec. Post replacement in Greenburgh typically costs $650-$1,200 for masonry pillars, or $380-$650 for steel posts with concrete footings. We re-calibrate limit switches and motor torque settings as part of the job, so your gate closes like the day it was hung.
Rail Repair
Wrought-iron rails on Greenburgh’s older estates crack at welds when freeze-thaw cycles shift gate posts out of alignment. We see this especially on the Victorian and Colonial Revival properties in the Irvington corridor. Rail repair with custom welding runs $220-$480 depending on access and whether we need to match decorative scrollwork. We grind, preheat, and weld with rod matched to the original iron, then apply a protective coating suited to Greenburgh’s humid river-valley climate.
Custom Welding
Off-the-shelf hardware won’t fit hand-forged ironwork from the 1890s. The housing stock in the Irvington/Greenburgh corridor skews toward pre-WWII estates with original masonry gate pillars and ironwork that requires custom fabrication or sourcing from specialty suppliers. Custom welding and fabrication in Greenburgh starts at $350 for simple bracketry and runs to $800+ for ornate scrollwork matching. We fabricate in our shop and install on-site, usually in one visit.
Gate Rollers
Sliding gate rollers on Greenburgh’s mid-century and newer properties seize from river-valley humidity and road salt tracked in winter. Replacement roller assemblies run $180-$320 installed, including track cleaning and alignment check.
Latch & Lock
Electric strikes and magnetic locks on automated gates corrode faster in Greenburgh’s damp microclimate than in inland Westchester. Latch and lock replacement or repair runs $160-$290, with upgraded stainless-steel hardware available for properties where standard steel won’t last.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenburgh
We stock parts and carry factory training on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Greenburgh customers, this means the correct fix on the first visit, whatever is on your driveway. We regularly source BFT actuators and Linear control boards for local jobs, and our shop carries common Viking and Ghost Controls hardware for same-day turnaround. When a manufacturer discontinues a board, like certain legacy LiftMaster models, we maintain relationships with specialty suppliers who warehouse obsolete inventory, or we can engineer a retrofit that preserves your gate’s operation without replacing the entire system.
Common Gate Parts & Welding Problems We See in Greenburgh Homes
- Rust-welded pintle hinges in masonry pillars. The Hudson River humidity accelerates corrosion on iron hardware far faster than in inland towns. We free seized pintles using penetrating oil and brass drift pins, never steel hammers that could fracture brownstone or bluestone.
- Strip-gear openers on mid-century split-level driveways. Original LiftMaster boards from the 1970s and 1980s are discontinued with no direct replacement. We source from obsolete-inventory suppliers or engineer retrofits using modern BFT or Linear controllers that match legacy bolt patterns.
- Hinges cracking at welds on wrought-iron gates. Freeze-thaw cycles shift gate post footings out of alignment every spring, stressing welds that were never meant to flex. We re-weld with proper preheat and post-weld treatment, then realign the gate to prevent recurrence.
- Actuator housings corroded from ground fog exposure. The river-valley microclimate keeps hardware damp year-round. We replace with marine-grade alternatives where available, and apply protective coatings during every service call.
Pricing for Gate Parts & Welding in Greenburgh, NY
| Service | Typical Range in Greenburgh |
|---|---|
| Hinge replacement (standard) | $180-$290 |
| Hinge replacement (historic/pintle socket) | $280-$450 |
| Rail repair with welding | $220-$480 |
| Custom welding/fabrication | $350-$800+ |
| Post replacement (steel) | $380-$650 |
| Post replacement (masonry) | $650-$1,200 |
| Gate roller replacement | $180-$320 |
| Latch/lock repair or replace | $160-$290 |
| $89 Seasonal Tune-Up | $89 |
What moves the needle on cost: access to the gate (steep Irvington hillside vs. flat Hartsdale driveway), whether we need to match historic decorative work, and whether the repair requires obsolete parts sourced from specialty suppliers. We settle on an upfront price before turning a single bolt. No surprises on the bill. Senior and Veteran discounts of 5% apply to every job, always. Call (877) 326-7055 for a free estimate, or bring us any written estimate for a free second opinion.
We Also Serve Cities Near Greenburgh
Our shop dispatches daily to Irvington, Dobbs Ferry, Hartsdale, and Hastings-on-Hudson. The same technician who knows your Broadway estate gate in Irvington can service your mid-century split-level in Dobbs Ferry or your contemporary installation in Hartsdale. We carry Greenburgh-area parts inventory to minimize return trips.
Serving Greenburgh, NY - Our Local Coverage Area
We’re based in the Greenburgh area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Greenburgh
Yes. We re-pour or sleeve lead-poured pintle sockets rather than drilling new hardware into 130-year-old stone. Standard hinge replacement methods would destroy the pillar face; our technique preserves the original masonry while restoring proper gate swing. We serviced a Victorian estate off Broadway in Irvington where a FAAC swing-gate operator had seized due to a rusted actuator housing. The gate’s original hand-forged iron hinges were set into brownstone pillars with lead-poured pintle sockets; we re-poured one socket and sourced a BFT replacement actuator that matched the legacy bolt pattern. Call (877) 326-7055 to schedule-estimates are free.
We often can. We maintain relationships with specialty suppliers who warehouse obsolete LiftMaster, Linear, and Viking inventory, and when boards are truly gone, we engineer retrofits using modern controllers that match legacy bolt patterns. A retrofit on a 1970s Greenburgh split-level typically runs $340-$580 versus $1,200+ for full system replacement. Call (877) 326-7055 with your model number for a free second opinion on any written estimate.
The river-valley microclimate in Greenburgh creates prolonged ground fog and elevated moisture that keeps gate hardware in near-constant dampness, accelerating rust and corrosion far faster than identical ironwork in inland Westchester towns like White Plains. Protective coating and hardware replacement are recurring needs here, not occasional maintenance. Our $89 Seasonal Tune-Up includes corrosion inspection and touch-up coating application. Call (877) 326-7055 to schedule.
Sometimes. If the footing is intact and the shift is under two inches, we can often re-plumb and re-anchor the post, then re-calibrate limit switches and motor torque settings to compensate. More severe shifts require replacement. Realignment runs $220-$380; post replacement starts at $380 for steel, $650 for masonry. We’ll assess on-site and give you an upfront price before starting. Call (877) 326-7055 for a free estimate.
Yes. Viking is one of the nine brands we carry factory training and parts inventory for. We stock common Viking control boards, gear sets, and limit switch assemblies for same-day repair on most Greenburgh jobs. If your Viking operator is beyond economical repair, we can source a modern replacement that fits your existing gate geometry without custom fabrication. Typical Viking repair in Greenburgh runs $240-$420. Call (877) 326-7055 with your model number.
Ready to get your gate working right? Call Ironworks Gate Co. at (877) 326-7055 for a free estimate. A live person will answer, 24 hours a day. We serve Greenburgh, Irvington, Dobbs Ferry, Hartsdale, and Hastings-on-Hudson with the same care we’ve brought to every job since 1984. Done right, and backed in writing.
Written by Frank Delmonico, Owner at Ironworks Gate Co., serving Greenburgh since 1984.