Fast, Reliable Gate Parts & Welding Across Borough Park
Gate hinge seized on your 1920s row house? Security gate stuck on 13th Avenue Friday afternoon? We understand the urgency. Ironworks Gate Co. has been repairing and welding gates in Borough Park for over 42 years, and we know that a broken gate here is never just an annoyance. It’s a security problem, a parking problem, sometimes a religious obligation. Our shop is stocked with non-standard hinges, custom-welded brackets, and replacement rollers sized for the century-old wrought iron that dominates this neighborhood. We answer the phone live, 24 hours a day, 7 days a week. Call (877) 326-7055 for upfront pricing and same-day service.
Why Ironworks Gate Co. of New York City Is Borough Park’s Preferred Gate Parts & Welding Company
We’ve worked on gates along 13th Avenue, 14th Avenue, and the side streets between New Utrecht and McDonald for decades. The masonry posts, the alley-load clearances, the non-standard hinge spacing from 1910s ironwork - we don’t need to measure twice because we’ve measured a thousand times before.
Borough Park homeowners call us back. They tell their neighbors. Our reputation here was built one welded bracket at a time, not through advertising.
When you call (877) 326-7055, a live person answers. No voicemail tree, no callback queue. Most repairs are completed in a single visit because our trucks carry parts for nine major automation brands and a full welding rig. We settle on an upfront price before touching a single bolt. Then we back every job with our written 90-Day Done Right Promise - the Keystone Standard. If it’s not right, we come back and make it right. No paperwork, no arguing.
Frank Delmonico has led this company since its founding in 1984. We’re not a one-truck outfit that disappears when the job gets complicated. We’re the company that makes a 40-year-old gate close like the day it was hung.
Our Gate Parts & Welding Services in Borough Park
Hinge Replacement
The original wrought-iron gates on Borough Park’s attached brick row houses were never built with standardized hinges. After a century of freeze-thaw cycles, salt, and urban pollution, those hinges corrode, seize, or shear entirely. We fabricate and weld custom hinge brackets to match your gate’s exact dimensions and the compromised masonry it’s mounted to. In Borough Park, we regularly see spring failures due to the non-standard pivot geometry of pre-1950 ironwork. A big-box hinge won’t fit. We measure, we cut, we weld, and we mount it right.
Post Replacement & Repair
New York City’s winter freeze-thaw heaves gate post footings in pre-1950 brick row houses, throwing the entire gate out of alignment. A leaning post doesn’t just look bad. It jams the gate, strains the opener motor, and eventually tears the hinges from the masonry. We excavate and repour post footings, or when the brick is too deteriorated, we engineer surface-mounted steel posts with custom-welded transition brackets. We swapped a seized LiftMaster gate opener on a historic 1915 wrought-iron door on 14th Avenue, where the original masonry posts had heaved from freeze-thaw cycles, requiring custom-welded brackets to mount the new opener. Our crew retrofitted a rolling-code keypad and replaced the corroded hinges, getting the gate operational before Friday’s Shabbat deadline.
Rail Repair & Custom Welding
Bent rails, cracked pickets, broken scrollwork - we repair it in place or in our shop. Our mobile welding rig handles steel, wrought iron, and aluminum. For Borough Park’s century-old gates, we match existing profiles and finishes so the repair disappears into the original work. Custom welding is not a last resort here. It’s often the only way to make a modern component fit a non-standard opening without destroying the gate’s character.
Gate Rollers & Track Repair
The 13th Avenue commercial corridor - lined with kosher grocery stores, Judaica shops, and bakeries - features roll-down and folding security gates that are cycled open and closed multiple times every single day, including a mandatory full close every Friday before sundown. This weekly high-frequency use pattern burns through rollers, springs, and locks far faster than comparable retail strips elsewhere in Brooklyn. We stock heavy-duty replacement rollers, track segments, and spring assemblies sized for commercial security gates, and we understand that a Friday afternoon failure on 13th Avenue is not a Monday problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Borough Park
Our technicians are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry common failure parts for Viking, Ghost Controls, and DoorKing systems in our local inventory, which means faster turnaround for Borough Park customers. Whether it’s a residential Ghost Controls swing gate on a Dyker Heights boundary or a commercial DoorKing slide gate serving a 13th Avenue storefront, we diagnose and repair on the first visit. No waiting for parts to ship. No second trip.
Common Gate Parts & Welding Problems We See in Borough Park Homes
- Freeze-thaw heaving misaligns everything. New York City’s repeated winter freeze-thaw cycles cause gate post footings to heave and wrought-iron components to crack or seize. The combination of summer humidity and urban air pollution accelerates rust on the century-old ironwork that dominates Borough Park’s residential stock. Gates that closed in October jam by March.
- Non-standard dimensions block off-the-shelf fixes. Most residential gates in Borough Park are original or early-replacement wrought-iron front-yard and stoop gates with non-standard dimensions, heavily corroded hinges, and deteriorating masonry posts that complicate modern hardware swaps. A hinge from the hardware store won’t bolt up. Custom welding is usually required.
- High-frequency cycling destroys commercial hardware. The mandatory full close every Friday before sundown means 13th Avenue security gates cycle far more than typical retail gates. Rollers flatten, springs fatigue, locks wear oval. We see these patterns nowhere else in Brooklyn at this concentration.
- Alley-load clearances complicate opener retrofits. Many Borough Park homes have gates opening into narrow alleys or directly onto sidewalks with inches to spare. Modern openers need custom mounting brackets, shortened arms, or relocated pivot points - all work we fabricate and weld on site.
Pricing for Gate Parts & Welding in Borough Park, NY
We believe in a square deal: upfront price, no surprises on the bill. Here is what typical gate parts and welding work runs in the Borough Park market:
| Service | Typical Range in Borough Park |
|---|---|
| Hinge replacement (custom welded) | $180 - $340 |
| Gate post repair / realignment | $290 - $550 |
| Rail repair with mobile welding | $220 - $420 |
| Custom welding (fabrication in shop) | $150 - $380 |
| Commercial roller / track replacement | $200 - $450 |
| Opener bracket retrofit (welded) | $170 - $310 |
Final cost depends on material thickness, access difficulty, and whether masonry repair is needed alongside the metalwork. We inspect, we quote, and we get your approval before starting. Estimates are free. Active offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (877) 326-7055 for your exact quote.
We Also Serve Cities Near Borough Park
Our Gate Parts & Welding team covers all of Brooklyn’s southwest corridor. We regularly work in Sunset Park, Kensington, Dyker Heights, and Fort Hamilton - often on the same day we service Borough Park. Same trucks, same stocked inventory, same upfront pricing.
Serving Borough Park, NY - Our Local Coverage Area
We’re based in the Borough Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Borough Park
Freeze-thaw cycles heave your masonry posts, which throws hinge alignment off by fractions of an inch. Those fractions multiply into binding, then into seized pivots, especially on original wrought-iron gates that were never built to modern tolerances. We replace with custom-welded hinge brackets sized to your actual gate and post condition, not a catalog part. Call (877) 326-7055 for a free inspection.
Yes. We repair rollers, tracks, springs, and locks on commercial security gates throughout the 13th Avenue corridor. We understand the Friday sundown deadline and prioritize same-day response for pre-Shabbat failures. Our trucks carry heavy-duty commercial hardware sized for high-cycle use.
Yes. We retrofit LiftMaster, Elite, and other major brands into tight-clearance installations by fabricating custom mounting brackets and shortened actuator arms on site. We measure your alley width, gate swing, and post condition, then weld the solution that fits. Most retrofits complete in one visit.
In most cases, yes. We excavate and repour the footing, or when the masonry is too far gone, we install a surface-mounted steel post with custom-welded transition brackets that preserve your existing gate. Replacement is rarely necessary unless the iron itself is fractured. We’ll show you exactly what we find.
We answer live 24 hours a day, 7 days a week, and we prioritize Borough Park’s Friday pre-Shabbat window. Most same-day calls are dispatched within hours. Call (877) 326-7055 - a live person will confirm our arrival time and get your gate secured before sundown.
Written by Frank Delmonico, Owner at Ironworks Gate Co., serving Borough Park since 1984.