Fast, Reliable Gate Installation Across Hollis
Gate installation in Hollis, NY typically runs $2,800-$6,500 for most residential jobs, with same-week scheduling available and permits handled when sidewalk or curb work is involved. We’re Ironworks Gate Co., and we’ve been installing and servicing gates across Hollis and eastern Queens since 1984. You can reach us at (877) 326-7055 any hour of any day - a live person answers, never a machine.
Hollis isn’t like its Nassau County neighbors, and it isn’t like Manhattan. The neighborhood’s narrow Queens lots, 1920s-1950s brick housing stock, and position inside NYC limits create a specific set of challenges for gate installation that we’ve spent four decades learning. Tight driveway clearances. Aging concrete that won’t stay put. Salt spray from Hillside Avenue and Francis Lewis Boulevard eating hinges every winter. And that surprise layer of NYC Department of Buildings oversight that doesn’t exist one block east in Bellaire or Queens Village. When you hire our Gate Installation team, you get tradesmen who know these conditions firsthand and build for them.
Why Ironworks Gate Co. of New York City Is Hollis’s Preferred Gate Installation Company
We’ve worked on gates along 204th Street, 205th Street, and the corridors running down to Hillside Avenue long enough to recognize the concrete apron from the pour date. Homeowners in Hollis call us because we don’t treat their property like a generic Queens job. We know the semi-detached brick homes with original wrought-iron gates that haven’t closed square since the Nixon administration. We know which driveways are too narrow for a swing arc and need a sliding solution. And we know the permitting dance with NYC DOT when a post replacement breaks the sidewalk line.
Our response time to Hollis averages under 90 minutes during business hours, and our 24/7 live phone line means you’re talking to a person who can dispatch a technician, not leaving voicemail at a call center. Every job carries our written 90-Day Done Right Promise - the Keystone Standard. If something isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. We’ve been in business since 1984 because we plan to be here for another forty, and that starts with treating the 400th job in Hollis with the same care as the first.
Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. They work in your driveway the way they’d work in their own mother’s.
Our Gate Installation Services in Hollis
Swing Gate Installation
Swing gates remain the most common request we get in Hollis, especially among homeowners with original wrought-iron fencing who want to preserve the neighborhood’s character. But Hollis swing gates fail differently than gates elsewhere. The concrete aprons poured in the 1920s-1950s have settled unevenly after decades of freeze-thaw cycles and salt intrusion from nearby arterials. Standard leveling procedures can’t fix post lean on footings that have dropped two inches on one side. We frequently install custom shim kits or, more often, pull the old post and pour a new deep footing to NYC DOB standards - 4 feet down, properly mixed, properly cured - so the gate hangs true and stays true.
We recently replaced a rusted swing gate on a narrow driveway off 205th Street in Hollis, where the original 1940s concrete apron had tilted 2 inches sideways. We installed a heavy-duty LiftMaster sliding gate on a new galvanized track system, anchoring the post with a 4-foot-deep footing to bypass the settled concrete entirely - no more sticking, even after spring thaw.
Sliding Gate Installation
For Hollis driveways where a swing arc would clip the neighbor’s fence or block the sidewalk, sliding gates are the practical solution. We’ve installed sliding systems on properties from Francis Lewis Boulevard down to the Nassau County line, often in spaces under 14 feet wide. The key is the track geometry and the post footing depth. Hollis’s settled concrete means we almost always pour fresh footings rather than bolt to existing slabs. We spec galvanized steel track with sealed bearing rollers rated for the salt-laden air that blows off Hillside Avenue every winter. Brands like BFT and Linear offer operators with adjustable soft-start and soft-stop programming, critical on narrow driveways where a gate that slams hard will shake the masonry over time.
Security Gate Installation
Hollis homeowners who’ve been in their homes twenty-plus years remember when the neighborhood felt different. A security gate isn’t about paranoia; it’s about controlling who enters your property while you’re home or away. We install security gates with integrated access control - keypads, telephone entry systems, rolling-code remotes - across Hollis’s 11423 ZIP code. Because many Hollis homes sit close to the sidewalk, we favor operators with obstacle detection and auto-reverse sensitivity calibrated for tight spaces. Viking and Ghost Controls both make units we trust for this profile: reliable in salt air, responsive to safety inputs, and straightforward to service when the time comes.
Pedestrian Gate Installation
The side walkway gates on Hollis’s semi-detached homes take more abuse than people realize. Kids, deliveries, gardeners - they’re opened a dozen times daily while the driveway gate sees two cycles. We install pedestrian gates with heavy-duty adjustable hinges and self-closing mechanisms that won’t sag after a year. Where the original iron has rotted through at the hinge pocket, we’ll fabricate custom replacement pockets or weld in new stock, matching the existing pattern so the repair disappears.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollis
We maintain certification and parts stock for nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hollis customers, this means we don’t order parts and make you wait. Our trucks carry common operator components, hinge hardware, and control boards for BFT, Linear, and Viking - the three brands we see most often in salt-exposed eastern Queens installations. If your gate is one of these makes, odds are we fix it on the first visit. If it’s another brand on our list, we source overnight from our Queens parts depot. No brand is “better” in the abstract; the right brand is the one that fits your gate geometry, your usage pattern, and Hollis’s specific environmental load. We’ll tell you straight which that is.
Common Gate Installation Problems We See in Hollis Homes
- Post lean from settling 1920s concrete aprons. Standard shimming can’t correct footing drop on concrete poured before modern mix standards. We pull and repour to NYC DOB depth specs, or the gate drags again within two seasons.
- Rusted hinge pockets from winter road salt spray. Hillside Avenue and Francis Lewis Boulevard get heavy NYC DOT salting. The aerosol drifts onto iron gates, concentrating at hinge pockets and latch points. We replace with galvanized or stainless hardware and seal welds properly.
- Misalignment compounded by freeze-thaw heave. Every spring we get calls from Hollis homeowners whose gate worked fine in October and drags in April. The freeze-thaw cycle lifts and drops the concrete unevenly. Our deep-footing installs break this cycle.
- Permit delays for sidewalk or curb-cut work. Hollis falls inside NYC limits, so post replacement that breaks the sidewalk triggers DOT and DOB permitting. Homeowners moving from Nassau County are often caught off guard. We build permit lead time into every estimate and handle the paperwork.
Pricing for Gate Installation in Hollis, NY
Here’s what gate installation costs in Hollis’s market as of 2025. These ranges include standard materials, labor, and basic automation. Permit fees, custom fabrication, and access-control upgrades are additional where applicable.
| Gate Type | Typical Range in Hollis |
|---|---|
| Single swing gate (standard steel/aluminum) | $2,800 - $4,200 |
| Double swing gate | $3,800 - $5,500 |
| Sliding gate (track system) | $4,200 - $6,500 |
| Pedestrian / walk-through gate | $1,400 - $2,400 |
| Security gate with access control | $5,500 - $9,000+ |
| Post replacement with deep footing (per post) | $850 - $1,400 |
What moves you within these ranges? Material gauge, automation brand, whether we can reuse existing footings or must pour new, and whether DOT permitting is required. We settle on an upfront price before turning a single bolt. No surprises on the bill. Call (877) 326-7055 for a free estimate at your Hollis property.
Active offers: $50 off any repair over $250; free second opinion on any written estimate; $89 seasonal tune-up; and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Hollis
Our service area covers all of eastern Queens and into Nassau County. We regularly install and repair gates in Bellaire, Terrace Heights, Queens Village, and Hillside - each with its own character, each close enough that our response times stay short. If you’re searching for Gate Installation in Hollis or anywhere nearby, the same team, same standards, and same written guarantee apply.
Serving Hollis, NY - Our Local Coverage Area
We’re based in the Hollis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hollis
Yes, if the post replacement involves breaking the sidewalk or curb cut, NYC DOT and DOB permits are required. Hollis is inside New York City limits, so the permit-light rules of neighboring Nassau County do not apply here. We handle the permit application as part of every job that requires it, and we build 2-3 weeks of lead time into our estimate so you’re not caught waiting. Call (877) 326-7055 and we’ll walk you through whether your specific post location triggers permitting.
The concrete apron beneath your gate posts has settled unevenly after decades of freeze-thaw cycles and salt-laden runoff from nearby arterials like Hillside Avenue. Standard shimming can’t compensate for footing drop on 80-year-old concrete. We typically recommend pulling the old post and pouring a new 4-foot-deep footing to current NYC DOB standards, which breaks the cycle and keeps the gate hanging true year-round. Call (877) 326-7055 for a free inspection and exact quote.
Yes, sliding gates are often the best solution for Hollis’s characteristically narrow Queens lots where a swing arc would hit the sidewalk or neighbor’s fence. We’ve installed sliding systems in driveways under 14 feet wide across Hollis, using galvanized track and sealed-bearing rollers rated for salt exposure. The key is proper post footing depth to avoid the settling issues that plague older concrete aprons. Call (877) 326-7055 to measure your opening and spec the right system.
BFT and Linear both manufacture operators with sealed housings and corrosion-resistant hardware that hold up well in Hollis’s salt-laden environment. Viking also offers excellent salt-rated units with robust obstacle-detection programming for tight driveway clearances. The “best” brand depends on your gate weight, cycle frequency, and whether you need integrated access control. We stock parts for all three and will recommend the right fit after seeing your setup. Call (877) 326-7055 for an on-site assessment.
A properly installed, well-maintained gate adds curb appeal and security appeal that Hollis buyers notice, particularly on the neighborhood’s 1920s-1950s brick homes where original ironwork is expected. More practically, a new gate with modern automation eliminates the deferred maintenance red flag that inspectors and appraisers flag. The value increase is modest but real, and the daily quality-of-life improvement is immediate. For a free estimate on your property, call (877) 326-7055.
Ready to get your Hollis gate done right? Call (877) 326-7055 now. A live person will answer, 24 hours a day, 7 days a week. We’ll schedule your free estimate at a time that works for you, settle on an upfront price with no surprises, and back every bolt we turn with our written 90-Day Done Right Promise. We’ve been serving Queens since 1984. We plan to be here when you need us again.
Written by Frank Delmonico, Owner at Ironworks Gate Co., serving Hollis and New York City since 1984.